High Efficient,Reliable,Convenient---


what is the impactor crusher and hammer mill difference

Impactor crusher

The impactor crusher is the objects in the free state by the striking force along its natural fissures, the weak part of the bedding plane, joint surface, such as selective crushing broken. It is different from hammering broken objects by the striking force in the constrained state, but also with other shear, economic pressure, grinding broken and different, and thus the lowest energy consumption in the crushing process, and due to its selective crushing capacity from the separation of useful minerals and more cubic role to monomer.

The impactor crusher is widely used in a variety of ores, cement, refractories, aluminum in the soil of clinker, carborundum, glass raw materials, mechanisms varieties, building sand, stone and various metallurgical slag soft or hard, very hard materials,silicon carbide, corundum, sintered bauxite, Misa high hard, extra hard and wear-resistant materials.

Impact hammer mill

The impactor crusher in the actual use of material is uneven, and “run large” impact hammer mill will enable these problems to be solved.

Material man-machine fed from the feed inlet, into the hammer area, broken by the impact of high-speed rotary hammer, at the same time, material especially high-speed crash in a counterattack board is further broken back to the hammer from the back plate shellsthe head area, continue to repeat the crushing process, and ultimately into the hammering area (between the hammerhead and the grate area) in the grate on further by the hammer of the hammer and abrasive. Practice has proved that the material not be fully broken in the first cycle of the rotor, but to go through several cycles before they get fully broken. Bulk materials may impact the process has not been fully broken. You can roll between the back plate and the hammer plate broken, this role has been confirmed by actual experiment (in the grate, its biggest product the particle size of not more than the gap size of the hammer plate and back plate).

The hammer mill for crushing medium hardness and brittleness of materials in the mining, cement, coal, metallurgy, building materials, roads, fuel and other industries. The device can adjust the grate of the gap material change in size, to meet the different needs of different users according to user requirements.

Now, you can OR to get price and product manual!

Other Crushing and Grinding Equipment

In order to recommend you the most suitable plant, you are kindly requested to tell us the below information:

1 what kind of stone do you want to crush?
2 what is the material size before crushing?
3 what is the final product size do you want?
4 what is the capacity you want tons per hour?
5 what will you do with the final products?